Mochini o Fetolang le oa Boring oa Tebile TCS2150
Tlhaloso ea Mosebetsi
Mochine o kenngoa ka hlooho ea mosebetsi le hlooho ea maeto e nang le molamu oa ho phunya / o borelang o potolohang, lisebelisoa tse peli tsa mosebetsi le sesebelisoa li ka potoloha, 'me sesebelisoa sa ho itšeha le sona se ka lokisoa, ho fepa feela.
Ho phaella moo, mochine ona o boetse o kenyelelitsoe sesebelisoa se kang sa lathe, e le hore mochine o eketse mosebetsi oa ho fetola selikalikoe se ka ntle motheong oa ho phunya sekoti se tebileng le mochine o borata.Mochini ke letoto la lihlahisoa, hape o ka fana ka lihlahisoa tse fapaneng tse fetotsoeng ho latela litlhoko tsa bareki.
Mochini o na le bethe, hlooho ea mosebetsi, lebone la chuck, phomolo e tsitsitseng, phomolo e tsitsitseng, hlooho ea khatello ea oli, damper ea vibration e tsitsitseng ea molamu o boratang, hlooho ea maeto e nang le molamu o pota-potileng, tsamaiso e pholileng, tsamaiso ea motlakase, hydraulic system, chip. ho tlosa sesebelisoa, sisteme ea ho lubrication, sesebelisoa sa ho fetola jj.
li-chuck tse 'nè li kenngoa holim'a hlooho ea mosebetsi ha li ntse li phunya,' me ha li ntse li cheka, ho sebelisoa lipoleiti tse peli tsa taper, e 'ngoe e kenngoa karolong e ka pele ea mokokotlo holim'a hlooho ea mosebetsi, e' ngoe e kenngoa hloohong ea khatello ea oli, lipoleiti tsa taper. li bonolo haholo bakeng sa ho ikemela, ka kakaretso, tekanyo ea lipoleiti tsa taper ke 15 °, tlhokahalo e qaqileng ea lipoleiti tsa taper e khethoa ke boholo ba mosebetsi oa mosebetsi.Moreki a ka khetha mokhoa o mong oa clamp.Ho na le poleiti ea taper ka pel'a hlooho ea khatello ea oli (sesebedisoa sa phepelo ea oli), 'me ho na le sehlahla se tataisang ka hare ho lipoleiti tsa taper, tse sebelisetsoang ho phunya tataiso / hlooho ea boring, sehlahla sena sa tataiso se tlameha ho fetoloa ha sesebelisoa sa ho itšeha. e tlameha ho fetoloa.
Tekheniki parameter
| Bokhoni ba ho sebetsa | Mefuta e fapaneng ea ho cheka Dia. | Φ40-Φ120mm |
| Max.boring Dia. | Φ500 limilimithara | |
| Max.botenya bo tenang | 1-16m | |
| Max.ho phethola Dia. | Φ600 limilimithara | |
| Workpiece clamped Dia.mefuta-futa | Φ100-Φ660mm | |
| Spindle | Bophahamo ba bohareng ho tloha setsing sa spindle ho isa betheng | 630 limilimithara |
| Spindle a tsoala Dia. | Φ120 limilimithara | |
| Sefate sa spindle bore | Φ140mm, 1:20 | |
| Lebelo la lebelo la spindle | 16-270rpm, mefuta e 12 | |
| Hlooho ea maeto e nang le bar e bilikang ea ho cheka | Spindle a tsoala Dia.ea hlooho ea maeto e nang le bar e bilikang ea ho cheka | Φ100 limilimithara |
| Taper ea spindle bore (hlooho ea maeto e nang le bar e bilikang ea ho cheka) | Φ120mm, 1:20 | |
| Lebelo la lebelo la spindle (hlooho ea maeto e nang le bar ea ho cheka e potolohang) | 82-490rpm, mefuta e 6 | |
| Fepa | Lebelo la ho fepa (ho sa feleng) | 0.5-450mm/min |
| Leeto le potlakileng la koloi | 2m/mots | |
| Likoloi | Matla a motlakase a ka sehloohong | 45KW |
| Matla a motlakase a hlooho ea maeto e nang le bar e bilikang | 30KW | |
| Matla a motlakase a pompo ea hydraulic | 1.5KW, n=1440rpm | |
| Rapit travel motor power of carriage | 5.5KW | |
| Fepa matla a motlakase | 7.5KW (enjene ea servo) | |
| Matla a motlakase a pompo e pholileng | 5.5KWx3 + 7.5KWx1 (lihlopha tse 4) | |
| Enjene ea Z axis | 4KW | |
| Enjene ea X axis | 23N.m (e se nang mohato) | |
| Ba bang | Khatello e lekantsoeng ea tsamaiso ea ho pholisa | 2.5MPa |
| Phallo ea tsamaiso ea ho pholisa | 100,200,300,600L/min |